Kingston ValueRAM 16GB DDR4 2133MHz KVR21S15D8/16

16GB DDR4 2133Mhz, Kingston 1.2V
KVR21S15D8/16

DESCRIPTION

This document describes ValueRAM's 2G x 64-bit (16GB)
DDR4-2133 CL15 SDRAM (Synchronous DRAM), 2Rx8, non-ECC,
memory module, based on sixteen 1G x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR4-2133
timing of 15-15-15 at 1.2V. This 260-pin DIMM uses gold contact
fingers. The electrical and mechanical specifications are as follows:

FEATURES

Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.18 (30.00mm)
RoHS Compliant and Halogen-Free

SPECIFICATIONS

CL(IDD)-15 cycles
Row Cycle Time (tRCmin)-46.5ns(min. )
Refresh to Active/Refresh-350ns(min. )
Command Time (tRFCmin)
Row Active Time (tRASmin)-33ns(min. )
Maximum Operating Power-TBD W*
UL Rating-94 V - 0
Operating Temperature-0o C to +85oC
Storage Temperature- -55o C to +100oC